基于测高精度最优值的星载分布式InSAR编队构形设计方法

编队构形设计是分布式干涉SAR系统总体设计的关键问题,它必须紧密结合系统性能评价和编队运动规律进行。针对星载分布式干涉SAR的双站、斜视、空间基线等特点,以主星带辅星群分布式InSAR为例,建立干涉测高精度与基线矢量的关系;以直角坐标过渡,建立基线矢量与卫星间轨道根数差的关系,从而建立了测高精度与卫星轨道根数差的关系;以雷达工作的中间时刻达到测高精度最优值为设计准则,得到双星和多星编队设计方法;仿真分析表明根据上述设计方法得到的优化编队构形,其测高性能要优于干涉车轮和干涉钟摆编队。     

一种新的保持分形特征的分形变形方法

针对IFS吸引子变形过程中间出现的分形特征退化的问题,提出基于局部吸引子的近似凸包及旋转匹配的特征对应方法.IFS吸引子的局部吸引子可由独立的IFS生成,IFS中每个压缩仿射映射存在不动点,构造所有不动点的凸包,即得到局部近似凸包;证明了局部近似凸包间的相似对应等价于局部吸引子间的相似对应,并提出了通过旋转匹配的特征对应方法实现局部近似凸包的配对,最后计算所有配对下相似度最高的一组局部近似凸包匹配,确定局部吸引子间的特征对应,即IFS特征对应.对两个IFS进行线性插值可实现保持分形特征的分形变形.     

惯性测量匹配法测定船体变形实施方案研究

介绍了船体变形的产生原因,详细分析了船体变形对航姿参数的影响和惯性测量匹配在实船上测量船体变形时的几种实施方案。分别讨论了在中心航姿系统部位和局部基准部位是否安装加速度计和速率陀螺时的不同情况,具体推导了变形角、局部基准部位的航姿角和摇摆线速度的计算公式。对各种方案进行了分析比较,指出了各自的优缺点,为惯性测量匹配法在实船上的应用打下了基础。     

武警部队快速机动中最优路径的实现

紧急条件下武警部队快速机动最优路径，是一个多目标多约束随机动态交通网络寻优问题。在分析交通网络拓扑化特点及最短路模型前提下，着重研究道路通行能力带给复杂公路网络道路寻优问题的影响，并结合GIS系统利用改进的Dijkstra算法求解。     

More on the search for an infiltrator

We have asymptotically solved a discrete search game on an array of n ordered cells with two players: infiltrator (hider) and searcher, when the probability of survival approaches 1. The infiltrator wishes to reach the last cell in finite time, and the searcher has to defend that cell. When the players occupy the same cell, the searcher captures the infiltrator with probability 1 ? z. The payoff to the hider is the probability that the hider reaches the last cell without getting captured. © 2002 John Wiley & Sons, Inc. Naval Research Logistics, 49: 1–14, 2002; DOI 10.1002/nav.1047     

Designing a screening experiment for highly reliable products

Within a reasonable life‐testing time, how to improve the reliability of highly reliable products is one of the great challenges to today's manufacturers. By using a resolution III experiment together with degradation test, Tseng, Hamada, and Chiao (1995) presented an interesting case study of improving the reliability of fluorescent lamps. However, in conducting such an experiment, they did not address the problem of how to choose the optimal settings of variables, such as sample size, inspection frequency, and termination time for each run, which are influential to the correct identification of significant factors and the experimental cost. Assuming that the product's degradation paths satisfy Wiener processes, this paper proposes a systematic approach to the aforementioned problem. First, an intuitively appealing identification rule is proposed. Next, under the constraints of a minimum probability of correct decision and a maximum probability of incorrect decision of the proposed identification rule, the optimum test plan (including the determinations of inspection frequency, sample size, and termination time for each run) can be obtained by minimizing the total experimental cost. An example is provided to illustrate the proposed method. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 514–526, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10024     

基于改进快速扩展随机树的机械臂路径规划

针对机械臂路径规划问题,提出一种基于改进RRT算法的路径规划方法。改进RRT结合了目标偏置策略和贪婪生长策略的优点,在随机采样时,以一定概率使采样点偏置为目标节点,降低随机采样的盲目性,在目标节点方向上采用贪婪式扩展策略,增加随机树局部方向上的生长速度。RRT法规划路径结果并非最优,提出改进GPP法删除多余路径节点,优化机械臂运动路径。通过与Biased-RRT和Greedy-RRT数值仿真结果对比,证明了改进RRT在计算时间、迭代次数、扩展节点数上均优于以上方法。在机械臂两种典型工作环境中的仿真结果表明,使用该方法可以较好解决排爆机械臂避障路径规划问题。     

Analysis and optimal design of discrete order picking technologies along a line

Order picking accounts for most of the operating expense of a typical distribution center, and thus is often considered the most critical function of a supply chain. In discrete order picking a single worker walks to pick all the items necessary to fulfill a single customer order. Discrete order picking is common not only because of its simplicity and reliability, but also because of its ability to pick orders quickly upon receipt, and thus is commonly used by e‐commerce operations. There are two primary ways to reduce the cost (walking distance required) of the order picking system. First is through the use of technology—conveyor systems and/or the ability to transmit order information to pickers via mobile units. Second is through the design—where best to locate depots (where workers receive pick lists and deposit completed orders) and how best to lay out the product. We build a stochastic model to compare three configurations of different technology requirements: single‐depot, dual‐depot, and no‐depot. For each configuration we explore the optimal design. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

基于直线特征及模板倾斜修正的图像匹配定位

针对火炮发射图像序列中运动目标后座的旋转问题，提出了基于直线特征及模板倾斜修正的匹配定位方法。该方法首先利用Hough变换提取出具有反应倾斜角特征的直线，与基准直线比较，算出直线旋转角度α，再把包含模板的基准图部分区域旋转α后截取新模板，使问题回到只有平移的情况并进行去均值归一化相关法（NNPROD）匹配。实验与分析表明，该方法可以有效地解决存在旋转、灰度对比度变化大、噪声干扰强、强光饱和等情况下的匹配定位问题，匹配精度较高。     

软件无失效测试数据的统计分析

软件可靠性估计是软件可靠性研究的重要问题之一,文中对分布式软件系统可靠性的评估方法进行了研究,给出了软件系统可靠度的最优置信下限.最后以某大型软件的评估为例,说明该方法的应用.